Enterprise customers following this same targeted approach for the Semi-Annual Channel can also fully deploy when ready. As an IT administrator, you decide when to broadly deploy once you have validated the apps, devices, and infrastructure in your organization work well with this release.

You no longer need to wait for our signal — deployment control and choice is yours. You can learn more about Windows Analytics tools and best practices for deployment and servicing the Semi-Annual Channel releases. As always, we will continue to evolve our releases based on your feedback. Protecting your device and your information is critical. These threats highlight the importance of having devices running the latest Windows 10 feature update and the latest monthly quality updates.

We build the latest security technology deep into the Windows operating system to provide defense-in-depth features that prevent evolving malware and other vulnerabilities from impacting your device, and layer on monthly quality updates that help your machine keep pace with the evolving threat landscape.

Because these vulnerabilities start at the processor level, however, having the latest Windows operating system OS updates is not sufficient to be fully protected; you will also need to install related firmware updates from your device manufacturer. Plainly all the versions after had never worked with my pc. I tried all the offline install procedures and they did not work. In my case the update downloaded and installed ok.

I then had to turn-off the pc and when it came back up it did a few reboots before “Reverting to previous version” Anyway, I downloaded the “wushowhide. The result was that the “Fall” update then finally succeeded. I’m not sure which driver actually caused the issue. I do not have the patience to track it down!!

Memo April 8, pm. I have a Gateway computer. I tried everything to update to , but nothing worked. Then I uninstalled wireless card drivers. The same problem. Finally , I physically removed the Wireless card from the computer. The update completed without any issues.

The WIFI card was the culprit. After the update I put the card back in and everything works fine. Dorothy March 29, am. I have been trying to update my friend’s PC — Gateway since October with this update.

I have read multiple fixes and tried most of them… and I had almost given up. The latest thing I tried worked and I was blown away. I had seen 1 article about a wireless card being removed. Since she didn’t use it, I removed. The update worked just fine after the Restart it kept asking for 20 times in my previous attempts at failure ….

Problem is Windows 10 failed an update installation and now will only power to Acer logo then after approx. Using escape key or Enter key or even power key to begin restart system acts like it’s restarting and completing installation but screen goes black then Acer logo comes on again and in another secs the same msg.

Routine repeats no matter What I try. A few times I’ve gotten the bootup page to come on but I don’t know if there’s anything I can use to by pass the locked system. Any ideas??? Will have to buy one from acer if neccessary. Am not technically savvy on PC’S. Help please….. George: a. Download and Install the Servicing stack update for Windows 10 Version b. Open Command Prompt as Administrator and give the following command:.

MikeB March 24, pm. Mike: a. Wayne March 24, am. Shawn March 23, pm. The update killed one of my home PCs. It now is in an endless loop with message “Windows could not complete the installation. To install Windows on the computer, restart the installation”. You click OK and it reboots into the same place.

I haven’t tried to remedy it yet. Luckily it’s not my only computer. I’m just now building a USB key with the installation on it and will try to repair it with that.

Any other advice is more than welcome! Shell March 23, pm. Amanda March 23, am. Well here we are again in update hell. After about a month of hoping that Microsoft might actually fix something, the temporary hold their tech people put on my computer must have ran out.

I’ve already tried all of the above before without success, and honestly, I’m about to just do a complete reinstall if I can’t get it to work.

Between health issues with my parents, and moving, this is the last thing I need to deal with…again. Finally done it today been trying to update since Jan. I try rename trendmicro folder to trendmicro, turn off firewall n all antivirus programs, prepared 2 standing fans to prevent overheat old laptop , 15hrs waits for updating….

I don’t even get the chance to get it to download as I get another message saying that I need to delete a number of folders in my Storage space.

When I went in, they had check marks alongside of what should be deleted so once I deleted it and rebooted, still had the same problem. I do not trust any of the work arounds they are asking you to do….

I don’t do anything fancy on my lap so have no idea why all of these issues are coming up. I understand another version should be coming out by the end of March Wonder if you can download that without having the other versions already installed.

Michael Goodman March 15, pm. JaceCar March 13, am. I’ve tried all of these methods and more with no success. When I turn off services clean boot and attempt the update, the update assistant goes through the motions then reboots… without even attempting to do the install.

Even after restoring services, it just reboots. Someone mentioned an SSD. I’m running on a gb with approx 80gb free. Is that a known problem? DH March 12, pm. Rodc March 12, pm. Download and install took 25 hours to download and install. RB March 8, pm. I removed as many things as I could from my desktop sound card, usb 3. Muhammad Aslam December 28, pm. Hi, I wonder after removing Mouse and Keybaord how I will be able to navigate to settings.

Rens March 10, pm. DJ March 6, pm. Tried all of this and finally had to do a recovery reset and that worked had to re-install programs afterward. What a time suck over the past several months. Abbi March 6, pm. After upgrading windows with the latest update media creation tool and it reinstalls whole windows 10 the issue was fixed!

Good luck. I have windows I’ve tried to ask Microsoft and always no answer from them. I am by no means a computer geek, etc. Claus March 2, am. I got the same issues here on several machines in our domain. Updates done so far: 0. Not even a reporting to the WSUS. Since those PCs cannot access the internet and only download those updats from WSUS, most of the solutions above also won’t work. GS March 6, am. None of the above worked for me, but after some failed updates Windows mentioned an error code that linked to my graphics card driver.

When I did a clean install of this driver the update finally worked. Thanks for this extensive post, it really helped me! RM March 8, am. I have found that most of the time, the update fails because of a driver issue. I’ve done several 20 failures so far, and all had an issue with at least one driver. The indicator is in the txt file generated by the update cycle and rollback.

The video failure will also flash a momentary message across the screen when the update hits the wall and initiates a roll back. I now have a string of successfully completed updated machines. Joe Meree February 27, am. To fix this I did all this and it didn’t work. Then: 1. Go here and get the fall creator update click update now and download it 7. Srboljub March 3, am. After so many attempts I did this and it worked.

Performed clean windows start find how to do clean windows start 3. Then I pressed “check for updates” and finally finished. Restored normal windows start undo what I did in line 2. John February 23, pm. None of these did it for me. I have 2 Lenovo T one running Home, the other Pro. The pro updated fine. Seems no matter how many different “solutions” from various forums I try I end up the same.

After download and restart I see a minimal amount of disk activity, then the system just sits there. It could be 2,3,4,12 hrs. I’ve repeated this for 3 days. After a forced shutdown and restart it reverts back to the old version, reporting the update wasn’t completed with error 0x I ran “solutions” specific to that error code with no help as well.

I’ve run the Windows update troubleshooter with no help. Truely frustrating. Jules February 19, pm. Bob February 19, am. Unfortunately none of these methods worked, but Thank you I think they helped me resolve the issue. Whilst downloading the update manually, I found a troubleshooting tool. The update failed, ran SFC and Dism, the update still failed. Just before doing a reinstall I decided to shutdown all Defender services and firewall and then tried the update and it worked.

I haven’t tried on another device, yet, but I hope this help others. Dennis February 19, am. Windows tried to install the update 59 times going by the update history, with your help i think its finally done. Thanks so much…. J February 12, pm. I’ve now gotten to the point where I am disabling the update altogether Method 6 however, after a couple of days, Ill find that it has re-enabled itself and the download process begins all over again.

Is this just for me? Is there a solution? DiamondDave October 3, am. I’ve had the exact same problem. Then a few days later it re-enables itself and I get a blue box appear in the middle of my screen telling me “Can’t download updates”…etc…etc.

Kroxo February 10, pm. I’ve got “Issue 2” on two computers, both purchased before I tried steps , nothing worked. I finally disabled the update step 6 and purchased new hardware.

The old computers are new dedicated video servers for my TVs. Kroxo: Try to repair Windows 10 with an in-place upgrade method 5 and additionally see this comprehensive guide to fix Windows 10 update problems.

Amanda February 4, am. I wish I could say for sure which, but after attempting Method 2, 3 and then 4 without success on their own, I went back and did Method 1 all the way through 4…at first it didn’t seem like even that would work. This time however, after booting up again, when I open Windows Update…my system says it’s up to date.

I even reloaded it to make sure. Here’s hoping it stays that way, because honestly that was the most frustrating experience I’ve had with a PC in a long time. Amanda February 5, am. Well, unfortunately a few hours later it’s now telling me I need to update again. At this point, I’m so frustrated that I’m about to just do a reinstall.

I’m currently backing up all of my personal files, as well as my games, and I’m going to give the above methods one more shot before reinstalling.

Here’s hoping one more shot works…. Tim January 29, pm. Jim Webber January 28, pm. Microsoft has now become much more aggressive at pushing this update. It starts to download and install soon after you logon. If it the fails to install properly, it tries again next day. Since it downloads the update from scratch each time, you quickly use up a lot of your monthly bandwidth.

After numerous attempts at applying fixes, disabling anti-virus etc I am giving up and have disabled the Windows Update.

CyberWarrior January 28, pm. I have googled this and none of these fixes worked for me and I tried them all. The only thing that worked was reformatting. My computer is now all up t date and running perfectly. Virginia January 28, am. I have noticed that the update has a lot of issues with older Intel chipsets.

A quick check on Intel’s site can prevent a lot of issues. You are likely good if there are Windows 10 drivers, if not. I tried method 2 after uninstalling anti malware and removing all USB connections and running the troubleshoot windows update.

It ran slowly but got there eventually. This was the 6th time I had tried it but the advice I got here helped enormously. Bob Herring January 24, pm.

Thanks so much. I was determined to fix it myself so thx. John D January 24, am. Why doesn’t Microsoft fix this? That is, 1 do a new update that does not cause all these problems but does give the same or better security, and does not have the supergraphics stuff that most people don’t need, and 2 give us a tool to make Win10 stop trying to install every day!

Every day, it slows down and interferes with using the computer! I know, MS should have fixed this months ago? I had the same problem and tried everything and nothing worked. I finally decided to reformat and now everything is updated and working fine. Vasilis January 13, pm. I tried to install this update a couple of times but it didn t work…. I m using my pc at home to run some music programms and for gaming so i didn t care much….. Yesterday I decided to install a copy of windows 10 again because time was right to format my pc…..

I found this page and thought to give one solution a try and if it didn t work i couldn t care less. I tried the first one and it worked right away…… I m writting here so that a feedback of your work can be known……. Thanks for your help…..!!!! Jim A January 13, am. None of these methods worked for me. Four days i read on internet and tested different methods. Then i mounted the image right click on Windows. In 45 minutes my system was updated without lost of data at installation point when you are asked to choose to keep my files or clean install i choose to keep my files.

The pc restarted few times. Now is working fine. Escuse me for spell. January 19, am. After at least 7 attempts I changed my outdated graphics card and then followed the steps above by Jim A, worked for me… Thanks.

Clint January 23, pm. Bill Harroff January 13, am. I have tried more than 30x to update to Windows 10, version since early December. I have run the various troubleshooting apps that come with Windows.

I have also tried the “top 5” fixes listed here. None have helped. I do not currently run any other virus detection software that conflicts; just Windows Defender. I’ve also started using the ethernet connection directly into our router. Retired computer tech January 25, am. Do you have an ssd drive? If so you might need to use partition wizard tool to increase the size of the windows system reserve partition to at least MB.

Then download the upgrade assistant, run it, and select copy to flash drive for installation on another computer. You will use this disk to install the new version. First, use belarc advisor to print a copy of your computer settings. This also includes any software licenses you may need later to reinstall programs that may no longer work properly.

Larry January 9, am. Getting rid of my corrupted software distribution subdirectory files is what I had to do. IMHO one should never have to uninstall the antivirus program or any other security program from your system to apply a legitimate fix from a legitimate company.

Doing what you suggest as step 1 opens oneself up to a lot of exposure as one continues to explore what other steps to take by following links — some of which may be sketchy! Ken January 8, pm. After weeks of doing nothing on my computer except for trying to update, it seems as if method 1 is working. Finally got to downloading updates stage and seems to be moving quickly. Thanks for the article!

I’ll report back after the installation. TL February 16, pm. Sandra Smith January 7, pm. My issue with the update is that I used to have Symantec Endpoint Protection. When Windows 10 came out, I installed it with no issues. My family tech genius, and he really is a genius in a director position at a major university, said Windows Defender is as good as any other antivirus program he said they were all crap anyway , so I uninstalled Symantec and chose to use Windows Defender.

Everything was going well until the update came out. I got the message that I needed to uninstall Symantec Endpoint Protection, but it had already been uninstalled I checked my program list in the control panel to be sure. Since I had no luck, I had our family genius come out, and he worked for quite a while doing his thing, and said that evidently there was some kind of hook still on my computer and he was going to see if one of his people had a link to send him that might solve the issue.

However, he is so busy, he has not had a chance to make it back to work on it again. This has been going on for weeks, since the update came out, and I am ready to scream. Is there a remedy? Chris January 9, am. I use Revo Uninstaller. It does a complete uninstall of the files left behind after deleting programs.

Sandra Smith January 15, am. Chris: Thanks for trying to help. Not wanting to waste my money downloading something that might not work, I tried downloading the free version of Revo Uninstaller.

However, because Symantec Endpoint Protection no longer appears in the control panel list of programs since I deleted it months ago, it doesn’t appear on the list of possible uninstalls using Revo.

Therefore there is no way to get to whatever it is that’s left and causing the problem. However, Symantec was installed on my computer by the family genius who tried to help me out, and I don’t have the number that CleanWipe requires to be able to download. I think after reading the two replies to my question, I’ll have to wait for the genius to get back to me whenever he finds time.

Sandra Smith: You don’t need a serial number. Click at the right side on the page, at “Download Files” and then just download and then run CleanWipe. On my , HP G60 Notebook laptop, after a successful download of Feature Update Win10, version , when my laptop automatically restarted took about 2 hours ; then automatically my usual “User” Sign in screen opened.

I am the only User. The initial User sign in password has never been changed. With no possible method to reset one’s password—basically one is locked out from their own computer!

In so doing, the computer does NOT follow standard shut down protocol. A solid blue screen will appear with white dots in the center spinning clockwise. This continues for about 5 minutes. The computer is completing its “restart.

And yes, the update has been installed. Pavel January 5, am. None of the methods worked. But I kept trying. Disabled all services from other software. Disabled everything in Device Manager that was possible to disable except network. Disabled Windows Update Service. Removed SoftwareDistribution folder completely. Finally, with the separately downloaded Windows 10 Windows Assistant it made it through and now after about a week of trying I am happy with ver.

Running on Asus XM. Awful stuff! Oh, and BTW. I had disabled it before the successful install. But now, if I enable this again, Windows fails to boot, crashing with some “Stop message”, complaining about some surprising IRQ levels… When I disable it again, it runs smooth again.

Fortunately, I do not need this feature currently, but I might need it soon. Suzan Martin January 2, am. Just worked on another laptop with failed update Failed multiple times over the last month. After update initialized and appears to install with restart required, and upon logon to Windows the screen would go black.

No display. Attempted the install multiple times with same result. To fix this I used “method 1” above. At this point I could logon to Windows normally. After that Deleted the Window SoftwareDistribution folder as detailed in “method 1”. Restart again.

 
 

[Windows 10 version 1709 の累積更新プログラム kb4493440 download chrome

 

Enterprise customers following this same targeted approach for the Semi-Annual Channel can also fully deploy when ready. As an IT administrator, you decide when to broadly deploy once you have validated the apps, devices, and infrastructure in your organization work well with this release.

Windows 10 version 1709 の累積更新プログラム kb4493440 download chrome no longer need to wait for our signal — deployment control and choice is yours.

You can learn more about Windows Analytics tools and best practices for deployment and servicing the Semi-Annual Channel releases. As always, we will continue to evolve our releases based on your feedback.

Protecting your device and your information is critical. These threats highlight the importance of having devices running the latest Downloaf 10 feature update and the latest monthly quality updates. We build the latest security technology deep into the Windows operating system to provide defense-in-depth читать полностью that prevent evolving malware and other vulnerabilities from impacting your device, and layer on monthly quality updates that help your machine keep pace with the evolving threat landscape.

Because these vulnerabilities start at the processor level, however, having the latest Windows operating system OS updates is not sufficient to be fully protected; you will also need to install related firmware updates from your device manufacturer.

Lastly, ensuring your antivirus products are up-to-date for example, Windows Defender is available in-box for free and updates automatically and that you are backing up critical files to the cloud remain best practices. For those with automatic updates enabled, Windows 10 will continue to provide the latest monthly security versioon to help keep your information and your device protected.

You dowhload schedule the right time: just pick a time that works best for you or set a new reminder for windows 10 version 1709 の累積更新プログラム kb4493440 download chrome. A final reminder alerts you 15 minutes before your device is scheduled to reboot, so you can properly save versiom close out of what you are doing. To ensure devices in enterprise environments are running the most current and secure version of Windows with the latest security updates, any device on Windows 10 Enterprise edition or Windows 10 Pro edition that is configured to receive updates kb449340 from Windows 179 will be automatically offered Windows 10, version after January 18, This does not apply to kb4493440 servicing editions.

Bring your の累積更新プグラム up to date with the Fall Creators Update, now available for all windows 10 version 1709 の累積更新プログラム kb4493440 download chrome globally — consumer and commercial alike. You can also update your device or personalize your settings including your active hours, restart options and other advanced options in the Windows Update settings menu.

If you have feedback, please share downloda with us via the Feedback Hub app.

 

Windows 10 version 1709 の累積更新プログラム kb4493440 download chrome.

 
Ее мозги работали словно на совсем kb44934440 уровне. Она подавляла его своей красотой, и всякий раз, когда он оказывался рядом, язык у него заплетался. Сейчас она держалась подчеркнуто сдержанно, и это пугало его еще сильнее. – Так в чем же проблема, Фил? – спросил Стратмор, перейти на источник холодильник.  – Может, чего-нибудь выпьешь. – Нет, а-а… нет, спасибо, сэр.  – Ему трудно было говорить – наверное потому, что он не был уверен, что его появлению рады.

 
 

 
 

И положил трубку. Дэвид, задержавшись в будке, тяжко вздохнул. Взял потрепанный справочник Guia Telefonica и начал листать желтые страницы.